• Home Inspection Checklist

  • Below are some items to have prepared for us:

    • What type of home are we inspecting?
      • Single family
      • Condo
      • Townhome
      • Manufactured home, etc.
    • What is the correct address of the property?
    • What is the square footage?
    • Is the property occupied or vacant?Are you working with a real estate agent?Who will give us access to the property?
      • If vacant, are the utilities on?
    • All services are COD. (cash, check, or credit card)
    • Are you able to be present for the inspectionWhen would you like to have an appointment scheduled.
      • If not present, what will be the mode of payment?
  • American Home Inspection Directory Says:


    What to include in your home inspection is the subject of much debate. Most of us home inspectors use identical core tools metrics, but outside of those core items there's lots of extra items and grey areas where we tailor things for your specific needs.  It's in those grey areas that many inspectors DO NOT get the job done due to a lack of standardization.

    To help us adapt for this, and to allow for accountability and transparency, we use outside standards and third party metrics to make sure your home inspection is complete and accurate. One of the best check lists and standards sets comes from American Home Inspection Directory. 

    What you see below is directly from their website - we intentionally did not write this part of our website (and are giving them credit for it) so you can see the standards that we use to create your inspection report. 




    The first step in inspecting a home is to examine the big picture for the home. Notice the area the home is located in. Are there other homes of similar age and construction details relative to the home you are inspecting? A comparison will give you a general idea of the up keep of the home. Have there been significant modifications to the exterior of the building and if so, how is the workmanship?


    Start at the exterior front of the house and work your way around the house (clockwise or counter-clockwise) at a distance which allows you to view a complete face comfortably. On each face (front, sides, rear) start your visual inspection at the top of the structure and work your way down to the ground and lot area. As an example, you would start at the front and note the roof and chimneys, the gutters, fascia and soffit's. Then, moving down the exterior wall coverings (brick, wood, aluminum), noting windows, doors, etc. Examine any porches or decks down to the foundation, then the grade or slope of the lot area, followed by any coverings, such as flower beds, walkway's, interlocking brick, driveways, etc. Move closer to the house, to examine more closely any details which may have attracted your attention, without skipping any items. Having completed the front, move to the side of the house and start the same procedure (roof to ground).


    On the interior, begin your inspection in the basement and then follow the system throughout each floor in the house. The system for inspecting the interior is to begin with the floor, go to the walls and then the ceiling, and then consider any appliances or other items in the room. Move from room to room, always in the same direction (clockwise or counter-clockwise) so as to not miss any areas. If you see a door, open it!
    In the utility room in the basement, first notice the floor, the walls (possibly the foundation walls are visible here), then the ceiling (floor joists may be visible), then go to the furnace, hot water heater, electrical panel, plumbing system, etc. When inspecting the floors, walls and ceilings, scan the entire areathat is visible, not just one section.
    In a finished room you would notice the floors, walls (including windows) and ceiling. Next look for the heat sources, electrical outlets and switches, fireplaces, closets etc. In bathroom or kitchen, notice the floor, walls and ceiling, then the plumbing fixtures.


    While performing the inspection, whether at the exterior, the interior or one of the mechanical systems, note the system first, then its relative condition. For example, if you were inspecting a wall on the interior of the home you would first note that the wall is plaster, and then examine the wall for cracks and irregularities.


    The following are some typical problems or occurrences to look for in the major components and systems of the home.

    Is the ridge (peak) showing a sag, or is it straight and level?
    Is the roof sagging between the rafters or trusses?
    Are there any signs of deterioration of asphalt shingles, such as curling, warping, broken edges, rounded corners or key holes(slits) becoming wider that normal?
    Any loose flashing's, at the chimney, roof-to-wall connection or elsewhere?
    Does the wooden roof deck appear rotten or delaminate under the last row of shingles?
    Are there any roof vents visible?

    Is the masonry cap cracked or broken?
    Are any bricks flaking or missing? Mortar missing?
    Is the chimney leaning?

    Note whether the soffit and fascia are wood, aluminum or plastic.
    Any loose or missing sections?
    If wood, are there any paint problems? Any visible rot?

    Ensure gutters slope down toward downspouts.
    Any rust or peeling paint?
    Apparent leaks or loose/sagging sections?
    Are the downspouts extended away from the foundations?

    Look for missing mortar
    Are the bricks flaking or cracking?
    Look for loose, missing or rotten siding, deteriorated paint.>
    Does the siding appear new? Does it hide the foundation wall?
    Exterior walls bowed, bulged or leaning?

    Look for problems with paint or caulking, and rotted wood components.
    Are the windows new or older? Are they the original windows? How old are they?

    Cracking or flaking masonry?
    Check for paint problems, rotted wood, and wood-earth contact.
    Note any settlement or separation from the house.
    Inspect the underside, if accessible.

    Check for cracks, flaking or damaged masonry.
    Note any water markings and efflorescence (whitish, chalky substance)
    Any bowing, bulging or other irregularities?
    Soft mortar?

    Does the grade slope away from the house?
    Any settled/low areas next to the foundation, or cracked walks/driveway?
    Is the property lower than the street or neighboring properties?

    Note any evidence of water penetration (stains, mildew/odors, efflorescence, loose tiles etc.)

    Check for deteriorated coverings or cracked ceramics.
    Any water staining or other damage?
    Sloping or sagging?

    Randomly sample to check that the windows and doors work.
    Are the walls straight vertically and horizontally?
    Look for cracked or loose plaster.
    Look for stains, physical damage or previous repair evidence.
    Any drywall seams or nails showing?

    Check for cracks in the plaster or loose, sagging plaster.
    Look for stains, mechanical damage or evidence of previous repair.
    Seams or nails showing?

    Check that all fixtures are secure.
    Are there any cracks in the fixtures?
    Note the condition of the tiles and caulking in the tub/shower area.
    Are the faucets working? Do they leak? Sufficient water pressure?
    Look for staining and rot under the counter-tops
    Randomly sample the operation of the cabinet doors and drawers.

    Type, style and age of heating & cooling systems. When were they last inspected or serviced?
    Type of water supply piping and drains - any visible rust and corrosion?
    Size and age of electrical service - are the outlets grounded? Visible wiring in good condition?
    Have there been any upgrades?